Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance. Red indicates the brake fluid needs immediate replacement, green represents good condition, yellow indicates the state is acceptable but soon replaced.
The Green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified
The Yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later
The Red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced
Red LED: change brake fluid
LED Red Flashing: battery replacement
LED Yellow: low moisture content, check again in six months
LED Green: brake fluid lines / cell row
Five LED indicators show the test results more accurate.
Testing DOT3,DOT4,DOT5 brake fluid.
Press the switch to turn on the power, the green LED light that represents the battery.properly,the green light does not shine on behalf To replace the battery
check the car brake oil quality.
5 LED lights display the percentage of moisture content in brake fluid.